The furler is the equipment required to use a gennaker or a Code 0.
The Sveggen 500 Bottom-Up is a 100% French furler 
It is used with a continuous Ø10mm rope, not supplied but available in the shop. The rope is installed using the line guide on the unlockable toothed pulley.
The bearings are stainless steel and waterproof.
The robust design of anodized 6082T6 aluminum provides a shock-resistant housing. The pins are captive and locked with a push button.
It is designed for boats from 52 to 65 feet and sail areas up to 220m² when sailing downwind.
It can also be used with a staysail equipped with an anti-rotation line in the luff.
It attaches to the deck or a bowsprit with the included 10mm shackle.
The toothed pulley with its shackle and the halyard swivel are included in the shipment.
| LOADS AND DIMENSIONS |
|---|
| Workload: | 5000 kg |
| Breaking load: | 10000 kg |
| 500BU FEATURES |
| Drum diameter: | 196mm |
| Screed width: | 20mm |
| Rapid axle diameter: | 12mm |
| Dimensions Useful: | 195mm |
| Rope diameter: | 10mm |
| Weight: | 2455 gr |
