CX 25

The furler is the equipment required to use a gennaker or Code 0.

A dedicated halyard for the gennaker or Code 0 is required, and the purchase of a 2:1 tackle is recommended to achieve the required luff tension and reduce the load on the halyard block. The drum and furling line can be permanently mounted on the bow and along the stanchions.

It is used with a continuous Ø10mm line, not supplied but available in the shop.

CX25 Seldén Intended for boats from 36 to 45 feet (14T) and sail areas up to 115m².
It can also be used with a staysail equipped with an anti-rotation line in the luff.

It attaches to the deck or a bowsprit very quickly thanks to its snap hook.

The toothed block and halyard swivel are included in the shipment.

• Drum equipped with metal teeth to ensure better grip on the furling line when furling.

• A wall separates the two arms of the furling line at the drum outlet to prevent the risk of overdriving.

• Drum and swivel with sealed ball bearings for a longer service life.
   
• Halyard swivel with rubber surround to prevent chafing against the mast.
   

• Thimbles easily connect to the drum and swivel using spring-loaded pins.

• Non-structural parts are made of fiberglass reinforced with polyamide composite.