The furler is the equipment required to use a gennaker or a Code 0.
The Sveggen 125 Bottom-Up is a 100% French furler 
It is used with a continuous Ø8mm line, which is not supplied but is available in the shop. The line is installed by removing the line guide from the toothed pulley.
The bearings are stainless steel and waterproof.
The robust design of anodized 6082T6 aluminum provides a shock-resistant housing. The pins are captive and locked with a push button.
It is designed for boats from 20 to 32 feet and sail areas up to 60m² when sailing downwind.
It can also be used with a staysail equipped with an anti-rotation line in the luff.
It attaches to the deck or a bowsprit using the included snap hook.
The package includes the toothed pulley and its snap hook, and the halyard swivel.
| LOADS AND DIMENSIONS |
|---|
| Workload: | 1250 kg |
| Breaking load: | 2500 kg |
| 125 BU FEATURES |
| Drum diameter: | 100mm |
| Screed width: | 14.5mm |
| Rapid axle diameter: | 8mm |
| Dimensions Useful: | 138mm |
| Rope diameter: | 8mm |
| Weight: | 740g |
